Good Korean Consulting Group

Repair Inquiry

Oakville Computer at 1-825-906-8033 is providing assistance with computer repairs.
If you do not receive an immediate response, you may contact us directly via text or phone call.

TitleIf You Hear Strange Noises from Your Furnace — Identifying Sounds and Checklist Before Calling a Professional2026-11-03 20:42
CategoryInterior
Name Level 10

As the season begins to bring heating into full swing, it is concerning if the furnace makes unusual noises. Not all sounds indicate a malfunction. Light clicking before ignition, the steady noise of the blower, and the gentle popping sound of the duct heating up are considered to be within the normal range. The problem lies with new, loud noises. If you make a note of when the sound occurs, it will be much easier to explain to the technician.

1. A loud "pop" sound when igniting — Suspect delayed ignition. This sound may occur when the gas burner does not ignite immediately, but instead accumulates for a moment before burning all at once. If this happens repeatedly, it can put a strain on the heat exchanger, so it is safer to turn off the heater and contact a technician rather than just watching it. Do not tamper with the gas or ignition system yourself.

2. High-pitched 'beeping' sound — Suspect the blower system. The high-pitched noise that occurs when the blower starts is often caused by worn blower belts or motor bearings. If the sound persists, the motor may stop, so please schedule an inspection as soon as possible.

3. Rattling Sounds — Start by checking the panels and ducts. Rattling is relatively common and often occurs when access panels are loose or screws have come undone. With the power off, check to ensure that visible panels and screws are securely fastened. If the sound persists even after tightening the panels, or if the noise is coming from inside the main unit, an internal inspection is required.

4. When there is a repeated clicking sound but no heat is produced. This could be a problem with the igniter or flame detector. If repeated ignition failures or the lack of heating persist, please have a technician inspect it.

5. Grinding sound — Turn off the power immediately and contact a technician. A grinding sound, like metal rubbing against metal, is a sign of wear in the motor or blower system; continuing to operate it can lead to more serious failures. Turn off the power and contact a technician.

When to evacuate immediately: If you smell gas or the carbon monoxide alarm goes off, do not touch switches or circuit breakers; get out of the house and contact 911 or the gas company from a safe place. Regularly checking that the carbon monoxide alarm is working properly and that the filter is clean will allow you to spend the winter with much greater peace of mind.

Source: Aire One Durham (https://www.aireonedurham.ca/furnace-making-noise/), Clarke & Rush (https://clarke-rush.com/furnace-making-noise-what-each-sound-means-and-when-to-call-for-service/)

Comment

(Enter the auto register prevention code)