As September draws to a close, temperatures are dropping sharply in the mornings and evenings. Around this time, water droplets begin to form on window glass; if left untreated, this can lead to mold growth and damage to the window frames. Here are some practical tips for reducing window condensation during the winter.
Why does condensation occur?
When warm, humid indoor air comes into contact with a cold glass surface, water vapor turns into water droplets. Condensation becomes more severe the greater the temperature difference between the inside and outside, and the higher the indoor humidity. Cooking, showering, drying laundry indoors, and even breathing increase indoor humidity. If left untreated, condensation can lead to mold, musty odors, peeling paint, and damage to window frames and drywall.
1. Maintain indoor humidity between 30 and 50°F.
The U.S. Environmental Protection Agency (EPA) recommends maintaining indoor relative humidity between 30 and 501 TP3T regardless of the season, and not exceeding 601 TP3T. In mid-winter, when outside temperatures drop below freezing, it is advisable to keep it below 301 TP3T. Measuring with a hygrometer makes management easier, and nowadays, many thermostats come with built-in humidity measurement functions.
2. Keep the humidifier on a low setting, and turn it off when it's cold.
Many households turn on humidifiers due to the dryness of winter, but lowering the output or turning it off completely on very cold days helps prevent condensation.
3. Use the exhaust fan when cooking or showering, and ventilate briefly once a day.
Turn on the kitchen and bathroom exhaust fans when cooking or showering, and open the windows for a few minutes once or twice a day to let out humid air. While a brief ventilation won't significantly cool the house, it will definitely lower the humidity. Leaving the blinds or curtains slightly open also helps with air circulation around the windows.
4. Window gaps and insulation reinforcement
Old windows have poor insulation and are prone to condensation. Sealing window gaps with weatherstripping, applying temporary insulation film, or using insulation curtains raises the glass surface temperature, reducing condensation. Replacing them with double or triple-pane windows is the most effective solution.
5. Wipe off any moisture immediately.
No matter how well you maintain it, some water droplets may form. If you see water droplets, wipe them off immediately with a towel, and if mold starts to appear on the window frame, please clean it right away.
source: ATCO Energy 'Winter Window Condensation Management' Guide (https://www.atcoenergy.com/blog/how-to-manage-winter-window-condensation-in-alberta), Muskoka Window and Door Centre 'Winter Window Condensation Removal' (https://muskokawindowanddoor.ca/blog/how-to-eliminate-winter-window-condensation), U.S. Environmental Protection Agency (EPA) Indoor Humidity Recommendations
|