Check furnace filters before winter — check the 1-inch filter every month
Winter in Ontario is the season when furnaces run all day long. Checking your filters in September or October, before the heating season kicks off, is the first step toward saving on heating costs and preventing breakdowns. A clogged filter reduces airflow, overloading the heater and, in severe cases, leading to component failure.
Replacement cycle — varies by filter type
- Paper/Glass fiber filter (thinnest): Replaced every month
- Pleated 1-inch Filter: Every 1–3 months based on MERV 8–11. During the intensive winter usage period, take it out and check every month.
- MERV 13 High Efficiency Filter (1 inch): Replace every 30 days or so. It filters out more dust, so it clogs quickly.
- Thick media filter (4~5 inches): Every 4 to 6 months
- If you have pets, allergy sufferers, or smokers, replace them more frequently than above.
Choosing a MERV Grade
MERV is a performance rating for filtering fine dust. General households MERV 8~13 You can choose from within that range. However, a higher rating is not necessarily better — older heaters may not be able to handle high-efficiency filters like MERV 13, which can block airflow and actually increase heating costs. If you are unsure, start with MERV 8.
DIY Replacement Tips
- thermostat OFFTurns it off (not just lowering the temperature, but cutting off the power)
- Filter location: Return air duct inlet or inside the furnace cabinet. Check the dimensions written on the existing filter frame (e.g., 16x25x1) and purchase the same size — if there are gaps, dust will bypass the filter.
- new filter frame's Make sure the arrow points toward the furnace Insert it (in the direction of airflow). If inserted in the opposite direction, the effect is reduced.
- Write the replacement date on the filter frame and set a reminder for the next inspection on your calendar or mobile phone.
Replacement time signal
Replace the filter immediately if light does not pass through when held up to a bright light. The filter could also be the cause if dust in your home has noticeably increased, your heating bill is higher than usual, or the airflow from the outlet has weakened. If you buy 3 to 4 spares in advance before winter, you won't have to rush out to find replacements during the harsh cold.
source: HVAC Guide Post — MERV 13 Furnace Filter Replacement Frequency for Winter Heating Seasons, Air Filters Delivered — Winter Furnace Filter Guide, Constant Home Comfort — Furnace Filter MERV Rating Guide (The content has been restructured for the benefit of immigrants.) |